Полезные SNMP MIB Object (OID) для выдирания с Cisco

Общие:

.1.3.6.1.4.1.9.2.1.56.0 — загрузка CPU в среднем за за 5 секунд.
.1.3.6.1.4.1.9.2.1.57.0 — загрузка CPU в среднем за за 60 секунд.
.1.3.6.1.4.1.9.2.1.58.0 — загрузка CPU в среднем за 5 минут.
.1.3.6.1.4.1.9.2.1.8.0 — объем свободной памяти.
.1.3.6.1.2.1.1.3.0 — аптайм
.1.3.6.1.4.1.9.1.0 — ProductID
.1.3.6.1.4.1.9.2.1.2.0 — WhyReload
.1.3.6.1.4.1.9.2.2.1.1.20.0 — IfReason

.1.3.6.1.2.1.2.2.1.8.i — активен ли интерфейс i.
.1.3.6.1.4.1.9.2.9.2.1.18.N — какой юзер на линии N (для async пулов)
.1.3.6.1.4.1.9.10.19.1.1.3.0 — число юзеров подключенных как serial (например, вошли терминалом)
.1.3.6.1.4.1.9.10.19.1.1.4.0 — число юзеров на линиях DS0
.1.3.6.1.4.1.9.10.19.1.1.5.0 — число юзеров с PPP
.1.3.6.1.4.1.9.10.19.1.1.10.0 — число юзеров соединившихся на v90
.1.3.6.1.4.1.9.10.24.1.1.2.0 — число юзеров активных всего (SessionTotal)
.1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.x — число активных линий на E1/PRI карте номер «x»
.1.3.6.1.4.1.9.10.19.1.2.2.0 — сколько отлупов (ModemCallsRejected)
.1.3.6.1.4.1.9.10.19.1.2.6.0 — сколько отлупов при отсутствии свободного модема (ModemNoResource)
.1.3.6.1.4.1.9.10.19.1.2.4.0 — ModemCallsClearedAbnormally
.1.3.6.1.4.1.9.10.19.1.2.1.0 — ISDNCallsRejected
.1.3.6.1.4.1.9.10.19.1.2.3.0 — ISDNCallsClearedAbnormally
.1.3.6.1.4.1.9.10.19.1.2.5.0 — ISDNNoResource
.1.3.6.1.4.1.9.9.47.1.1.6.0 — SystemModemsInUse
.1.3.6.1.4.1.9.9.47.1.1.7.0 — SystemModemsAvailable

.1.3.6.1.2.1.4.12 — ipOutNoRoutes !=0 => routing problems
.1.3.6.1.2.1.6.13 — tcpConnTable can process, e.g. for current Oracle sessions
.1.3.6.1.2.1.11.4 — snmpInBadCommunityNames !=0 may be a security issue
.1.3.6.1.2.1.16.1.1.1.13 — etherStatsCollisions value irrelevant but big increase might indicate problem.
.1.3.6.1.2.1.16.1.1.1.12 — etherStatsJabbers should be very low
.1.3.6.1.2.1.16.1.1.1.6 — etherStatsBroadcastPkts
.1.3.6.1.2.1.16.1.1.1.7 — etherStatsMulticastPkts

.1.3.6.1.4.1.9.9.48.1.1.1.2 — number and names of the memory pools.
.1.3.6.1.4.1.9.9.48.1.1.1.6.1 — gives pool 1 (proc) memory free
.1.3.6.1.4.1.9.9.48.1.1.1.6.2 — gives pool 2 (i/o) memory free.
.1.3.6.1.4.1.9.9.48.1.1.1.7.1 gives proc largest contiguous block free.
.1.3.6.1.4.1.9.9.48.1.1.1.7.2 gives i/o largest contiguous block free
.1.3.6.1.4.1.9.9.48.1.1.1.5.1 gives proc memory used
.1.3.6.1.4.1.9.9.48.1.1.1.5.2 gives i/o memory used

Подробнее для сервера доступа, N — номер слота или порт, в зависимости от контекста:

.1.3.6.1.4.1.9.9.47.1.1.7.N — The number of modems currently available to take calls
.1.3.6.1.4.1.9.9.47.1.3.1.1.9.N — The average call duration for each modem in the NAS
.1.3.6.1.4.1.9.9.47.1.3.3.1.1.N — The number of calls not answered by a modem.
.1.3.6.1.4.1.9.9.47.1.3.3.1.2.N — The number of modem calls that failed to train up.
.1.3.6.1.4.1.9.9.47.1.3.1.1.14.N — The current transmit speed (TX) of all the modems in the NAS.
.1.3.6.1.4.1.9.9.47.1.3.1.1.15.N — The current receive speed (RX) of all the modems in the NAS.
.1.3.6.1.4.1.9.10.19.1.3.1.1.13.N — List of called Dialed Number Information Service (DNIS) phone numbers.
.1.3.6.1.4.1.9.10.19.1.3.1.1.14.N — List of asynchronous terminal lines (TTY) in use.
.1.3.6.1.4.1.9.10.19.1.3.1.1.6.N — List of which user is using which modem slot.
.1.3.6.1.4.1.9.10.19.1.3.1.1.7.N — List of which user is using which modem port.
.1.3.6.1.4.1.9.10.19.1.3.1.1.8.N — Время сидения на линии.
.1.3.6.1.4.1.9.10.19.1.3.1.1.3.N — Список юзеров.
Circuit Utilization OIDs
.1.3.6.1.4.1.9.10.19.1.1.2.N — The number of analog calls connected.
.1.3.6.1.4.1.9.10.19.1.1.4.N — The total number of calls connected.
.1.3.6.1.4.1.9.10.19.1.1.1.1.7.N — The number of calls that have occupied a specific DS0.
.1.3.6.1.4.1.9.10.19.1.1.1.1.8.N — The time for each DS0.
.1.3.6.1.4.1.9.10.19.1.1.5.N — The number of active PPP calls.
.1.3.6.1.4.1.9.10.19.1.1.8.N — The maximum number of DS0s ever used simultaneously.
Modem Information OIDs
.1.3.6.1.4.1.9.9.47.1.1.7.N — The number of modems currently available to take calls.
.1.3.6.1.4.1.9.9.47.1.3.1.1.9.N — The average call duration for each modem in the NAS.
.1.3.6.1.4.1.9.9.47.1.3.3.1.1.N — The number of calls not answered by a modem.
.1.3.6.1.4.1.9.9.47.1.3.3.1.2.N — The number of modem calls that failed to train up.
.1.3.6.1.4.1.9.9.47.1.3.3.1.3.N — The number of modem calls that successfully trained up.
.1.3.6.1.4.1.9.9.47.1.3.1.1.14.N — The current transmit speed (TX) of all the modems in the NAS.
.1.3.6.1.4.1.9.9.47.1.3.1.1.15.N — The current receive speed (RX) of all the modems in the NAS.
User Information OIDs
.1.3.6.1.4.1.9.10.19.1.3.1.1.3.N — List of users currently connected and authenticated.
.1.3.6.1.4.1.9.10.19.1.3.1.1.8.N — Call durations for currently connected and authenticated users.
.1.3.6.1.4.1.9.10.19.1.3.1.1.2.N — List of user Caller IDs (CLID).
.1.3.6.1.4.1.9.10.19.1.3.1.1.13.N — List of called Dialed Number Information Service (DNIS) phone numbers.
.1.3.6.1.4.1.9.10.19.1.3.1.1.14.N — List of asynchronous terminal lines (TTY) in use.
.1.3.6.1.4.1.9.10.19.1.3.1.1.6.N — List of which user is using which modem slot.
.1.3.6.1.4.1.9.10.19.1.3.1.1.7.N — List of which user is using which modem port.
.1.3.6.1.4.1.9.10.19.1.3.1.1.4.N — List of which IP addresses are currently in use.

Информация по интерфейсам:

.1.3.6.1.2.1.1.5.0 — sysName (.1.3.6.1.2.1.1.1.0 — sysDescr,
.1.3.6.1.2.1.1.4.0 — sysContact,
.1.3.6.1.2.1.1.6.0 — sysLocation)
.1.3.6.1.2.1.2.1.0 — число интерфейсов
.1.3.6.1.2.1.2.2.1.2.i — описание интерфейса i
.1.3.6.1.2.1.2.2.1.3.i — тип интерфейса i (см. Приложение 1.)
.1.3.6.1.2.1.2.2.1.1.i — ifIndex
.1.3.6.1.2.1.2.2.1.14.i — ifInErrors
.1.3.6.1.2.1.2.2.1.20.i — ifOutErrors
.1.3.6.1.2.1.2.2.1.10.i — ifInOctets
.1.3.6.1.2.1.2.2.1.16.i — ifOutOctets
.1.3.6.1.2.1.2.2.1.13.i — ifInDiscards
.1.3.6.1.2.1.2.2.1.19.i — ifOutDiscards
.1.3.6.1.2.1.2.2.1.11.i — ifInUcastPkts inbound unicast pkts
.1.3.6.1.2.1.2.2.1.17.i — ifOutUcastPkts
.1.3.6.1.2.1.2.2.1.12.i — ifInNUcastPkts inbound nonunicast pkts
.1.3.6.1.2.1.2.2.1.18.i — ifOutNUcastPkts
.1.3.6.1.2.1.2.2.1.15.i — ifInUnknownProtos
.1.3.6.1.2.1.2.2.1.21.i — ifOutQLen
.1.3.6.1.2.1.2.2.1.5.i — ifSpeed
.1.3.6.1.2.1.2.2.1.8.i — ifOperStatus (up 1, down 2, testing 3)
.1.3.6.1.2.1.2.2.1.7.i — ifAdminStatus (up 1, down 2, testing 3)
.1.3.6.1.2.1.2.2.1.8.i — ifOperHack (up = 1 else 0)
.1.3.6.1.2.1.2.2.1.7.i — ifAdminHack (up = 1 else 0)

Типы интерфейсов (.1.3.6.1.2.1.2.2.1.3.i — тип интерфейса i):
0 — default
1 — other
2 — regular1822
3 — hdh1822
4 — ddn_x25
5 — rfc877_x25
6 — ethernet_csmacd
7 — iso88023_csmacd
8 — iso88024_tokenBus
9 — iso88025_tokenRing
10 — iso88026_man
11 — starLan
12 — proteon_10Mbit
13 — proteon_80Mbit
14 — hyperchannel
15 — fddi
16 — lapb
17 — sdlc
18 — ds1
19 — e1
20 — basicISDN
21 — primaryISDN
22 — propPointToPointSerial
23 — ppp
24 — softwareLoopback
25 — eon
26 — etherne_3Mbit
27 — nsip
28 — slip
29 — ultra
30 — ds3
31 — sip
32 — frame_relay

1.3.6.1.4.1.9.2.2.1.1.42 — locIfipInPkts IP
1.3.6.1.4.1.9.2.2.1.1.43 — locIfipOutPkts IP
1.3.6.1.4.1.9.2.2.1.1.44 — locIfipInOctets IP
1.3.6.1.4.1.9.2.2.1.1.45 — locIfipOutOctets IP
1.3.6.1.4.1.9.2.2.1.1.62 — locIfnovellInPkts IPX (Novell)
1.3.6.1.4.1.9.2.2.1.1.63 — locIfnovellOutPkts IPX (Novell)
1.3.6.1.4.1.9.2.2.1.1.64 — locIfnovellInOctets IPX (Novell)
1.3.6.1.4.1.9.2.2.1.1.65 — locIfnovellOutOctets IPX (Novell)
1.3.6.1.4.1.9.2.2.1.1.74 — locIfbridgedInPkts Bridged
1.3.6.1.4.1.9.2.2.1.1.75 — locIfbridgedOutPkts Bridged
1.3.6.1.4.1.9.2.2.1.1.76 — locIfbridgedInOctets Bridged
1.3.6.1.4.1.9.2.2.1.1.77 — locIfbridgedOutOctets Bridged

— Подробнее смотрите ftp://ftp.cisco.com/pub/mibs/

взято тут

Запись опубликована в рубрике overminds с метками , . Добавьте в закладки постоянную ссылку.

Добавить комментарий